Monthly Archives: January 2016

  • The Kanger Subtank Mini Sub Ohm Tank

    A Kangertech Subtank is available in multiple sizes: a Subtank Nano holds 3 ml of e liquid and the Kanger Subtank Plus holds a whopping 7 ml.

    The Kanger Subtank Mini has a 4.5 ml capacity, so it is a middle option for moderate people who want enough room for e juice to last a considerable time but not a system so big it needs its own zip code.

    The Kangertech Subtank Mini 4.5-ml Tank

    Kangertech Subtank Mini Tank


    Kanger’s medium-sized Subtank is advertised as smaller than an Aspire Atlantis but with more room for juice, which is yet another advantage of striking middle ground. Elect to install pre-built coils (1.2 or 0.5 ohms) or rebuild the tank with an RBA deck so you can build your own coils. Inside, you find square Japanese Organic Cotton Coils which are supposed to last a long time while also creating clean vapor. The fact that your tank is made from glass helps enormously by not releasing fumes under high-watt conditions.

    New Airflow Control

    Kanger upgraded their airflow control valve to be easier to use with smaller holes and two channels. Their aim is to allow you to totally control airflow, even cutting it off entirely if you want a tight draw. Hardware (top and bottom caps plus this valve) have been constructed from 304 stainless steel which is hard-wearing and clean.

    Save 10% On The Subtank Mini – $22.49!

    Never Expires

    Other Features

    This is a 22-mm tank: the sort with a profile to fit most mods such as narrow iStick devices, a Mini Book, or the Cool Fire IV. A 510 threading connector is designed in such a way as to flexibly accommodate loads of models as long as they are 510 threaded also.

    Subtank Mini Kit

    The RBA is insulated with PEEK material to maintain high temperatures safely. Now that TC mods are all the rage, Kanger is manufacturing coils made from Nickel 200 which are compatible with the Subtank Mini.

    Mini Starter Kit

    The Kanger TopBox Mini Starter Kit features a Mini tank and also the TopBox vape mod. The tank is essentially a top-filling version of the Subtank Mini.

    TOPBOX Mini Starter Kit

    Colors are platinum, black, and white. Most of them contain black O-rings rather than clear ones (the typical style), but the black model contains red O-rings. A number of Minis are also sold separately in colors like blue and white.

    The Kanger TopBox Mini TC 75W Mod operates between 7 and 75 watts with temperature control as well and a vivid screen. Set your TC value to a maximum of 300C or 600F. The lowest resistance a TopBox supports is 0.1 ohm which you can easily achieve using the RBA and a Nickel 200 coil in one of four modes: Nickel, Titanium, stainless steel, or Ni-Chrome.

    You will need one 18650, high-drain battery which is removable through a magnetic door but also rechargeable in place using a USB port. Your device won’t suffer short-circuit, voltage extremes, or reverse-battery malfunction.

    Buy The TOPBOX Kit:

  • Vapecige BIGGER DNA 200

    In a world where everything technological is getting smaller, Vapecige introduces something bigger with the Vapecige BIGGER DNA 200. When you see that word “DNA,” you know one thing for sure: that your mod is powered by an Evolv chipset. As far as the title goes, BIGGER is an apt name for this square, wide, but strangely narrow box.

    Evolv DNA 200

    This is the most powerful Evolv chipset to date, although it could be surpassed at any time by the American company known for their safety features and vaping customization capacity. An OLED screen lets you view functional choices (temperature control or variable watt vaping) and also displays warnings or alerts. It’s clear and clean; easy to read. The chipset protects vapers from overheating, overcharging, low voltage, and more.

    The Vapecig BIGGER DNA 200

    So now you know a few things about the DNA 200 by Evolv, which gives you a little insight into the Vapecige BIGGER DNA 200 too. Adjust power to as much as 200 watts and down to as little as 1 watt, although you are not going to buy a 200-watt box mod in order to run it so low.

    That’s a safety feature allowing your device to stay cool. The screen is quite large at just under 1 inch oriented vertically to the left side, front facing. This display indicates several values: those watts from 1W to 200W, temperature from 100C to 300C or 200F to 600F, voltage when you are in VW mode (Watts and Temperature during TC usage), and the resistance of your coil.

    10% Off The Vapecige BIGGER DNA 200

    $134.99 after the discount
    Never Expires

    Checking Resistance

    Here is another aspect to the Evolv DNA 200 Chip: it can tell what sort of coil you are using and its resistance. Early mods only offered Variable Wattage, so it didn’t matter what coil material was used, just ohms. Now, with a TC mod like the Vapecige BIGGER, your chip detects whether you are using Kanthal or Nickel 200, the latter being higher quality metal developed for this sort of purpose.

    If vapers choose Kanthal wire, their mod only permits the vaper to adjust wattage and will automatically monitor for overheating. When you apply a Nickel 200 or Titanium coil, it is possible to switch into TC function. With Kanthal wire, the Vapecige BIGGER lets you build or install coils with resistance as low as 0.2 ohms. In temperature control mode your lowest resistance is 0.1 ohms.

    Special Body

    VapeCige Bigger DNA200 Black

    Rubber paint provides a special sort of texture you do not usually get with anodized and brushed metals. The black, red, or blue BIGGER by Vapecige feels more comfortable as a result. When a vaper is gripping a device for several hours off and on all day, this is a lot easier on his hand.

    The back cover is magnetically attached to hold three removable batteries in place. It comes off with a tug but remains in place reliably the rest of the time. Although a tiny USB outlet sits below adjustment buttons and your screen, the makers advise using this to upgrade Evolv’s firmware at a later date, not for charging batteries.

    Lockable Device

    If you want to turn your mod off or lock it into a specific mode, there are instructions for doing that. It is only a matter of pressing the power button so many times rapidly. You can also vape stealthily, your screen turned off but still working when you need it.

    Buy Online At:

  • Project Sub-Ohm Products

    VaporDNA’s product brand known as Project Sub-Ohm appears to be a partnership with various manufacturers although this isn’t totally clear. As you can see by the name, these are devices for sub-ohm vaping plus accessories and swag if you’re into promotion by apparel. Browse the VaporDNA Project Sub-Ohm collection.

    Project Sub-Ohm

    A section devoted to Project Sub-Ohm products contains over 70 items. These are mostly mods and tanks and we could be here all day in an attempt to peer closely at every listing, so we’ll focus on three: The Mutank Sub-Ohm Tank System Indulgence, S200 DNA 200 Box Mod, and flaskmaN SX350J 100W mod.

    Mutank Sub Ohm Tank System (about $30)

    Project Sub-Ohm RDTA Edition Mutank Sub-Ohm Tank System

    This 22 mm Rebuildable Dripping Tank Atomizer is the latest edition of their Mutank model by Project Sub-Ohm and Indulgence. Their two-post deck uses four 1.5-mm terminals and features a 5-ml sturdy glass tank with top-fill capacity.

    Inside, a PEEK insulator maintains maximum heat. Building coils should be easy for the experienced coil builder on this 304 Stainless Steel deck but the customer can opt to swap pre-built Japanese organic cotton coils too. Try 0.3 ohms for up to 150W. Select Twisted (0.3 ohms), Clapton (0.5 ohms), or Quad Coils (0.2 ohms).

    A wide bore Delrin tip stops you from getting burned with the help of heat dissipation. The silver-plated brass 510 pin enables flexible applications to Project Sub-Ohm and other brands of mod. You’ll know the real deal by its odd inner engravings in the shape of a face.

    S200 DNA 200 Box Mod (roughly $170)

    S200 DNA 200

    This is a 100% American product as you might have guessed by the $170 price tag. Chinese vape mods don’t cost this much, but that’s what you get for American quality from Evolv and Project Sub-Ohm.

    This comes from the Project Square series using a DNA 200 PCB for temperature control and superior protection. This chip set is also 97% efficient and supports 0.1 ohms using TC coils. Firmware can be upgraded later when Evolv comes up with their next great innovations.

    As for the mod frame, this is constructed from hardened aluminum into an ergonomic shape for handheld comfort. The S200 uses a 1300-mAh 3S Li-Po cell. Threading of stainless steel is sturdy, smooth, and won’t rust while a silver-plated contact pin is compatible with the Mutank RDTA.

    Vent holes let out hot air from a mod that can operate at up to 200W and 600F. The DNA 200 PCB keeps an eye on temperature, voltage, resistance, and maintains a safe, efficient setup with a crisp OLED display. It’s big compared to many mods at over 90 mm tall but still a pocket-sized device.

    flaskmaN SX 350J 100W Mod ($300)

    Project Sub-Ohm flaskmaN SX350J 100W TC Box Mod

    This is serious money. Why would you pay that sum for a mod, USA-made or not?

    Consider the facts. This Vapor Flask/Project Sub-Ohm combo provides a Yihi Chip, the SX350J-VF. This chip is precise and agile with up to 100W capacity supported by two 18650 batteries which you must add to your $300 bill (a little cheap of VaporDNA in my opinion given the price).

    The flaskmaN supplies temperature control vaping accuracy and supreme safety within a curved frame resembling a whiskey flask. Its base is made from stainless steel as are threads and the firing button, but the main frame was milled from 6061 Billet Aluminum: aircraft-grade metal. This is covered in a black texture created by the anodization process which adds an element of comfort to light but cold metal.

    There are multiple memory options and a 0.05-ohm resistance minimum using Temperature Control coils like Ni200. You’ll know the authentic, extremely limited edition SX350J by its red and black Colorway trim, engravings (flaskmaN and Project Sub-Ohm), and the curved flask-style format.

  • Aspire Cleito Tank

    Aspire’s latest tank is another sub ohm beauty; an elegant and interesting addition to their existing line of customer-preferred vaping accessories, until you add Cleito accessories: then this turns into a potentially garish experience. Cleito is named for Poseidon’s mortal wife, thus continuing the mythological associations Aspire makes when naming their products (Atlantis, Nautilus, Pegasus, etc.)

    Save 10% On The Aspire Cleito Tank

    Never Expires

    Aspire Cleito Tank

    This top-fill tank adds yet another atomizer option when you create your variable watt system. Fill from the top to save yourself the trouble and mess of removing the atomizer from your mod to add more e juice or leaving little e juice drips when you do that. Small grooves in the top cap supply grip.

    New Atomizer Design

    The atomizer design for Aspire’s Cleito Sub Ohm Tank takes the place of chimney styles. This new variety of coil is set to make the most of airflow.

    Aspire has always been at the forefront when it comes to coil design. Their BVC (Bottom Vertical) coils inspired many imitators. Who knows what will come of their newest Clapton coils from Aspire? An RTA Kit is next on Aspire’s sub ohm agenda, so watch for that. With the RTA kit, you can easily adapt the Cleito to operate with 100W and even 200W devices like the Fuchai 200W (Sigelei) and VOX 100W (VaporFi).

    Design and Build

    Aspire Cleito Tanks

    The Cleito’s top and bottom caps are constructed from 304 stainless steel. The tube, however, is made from glass. It’s the classic combo. At the top, a Delrin-insulated wide-bore tip keeps vapor from burning your mouth. This is a 510 tip; replaceable if you prefer a different shape or material from the solid black top that takes something away from the rest of Aspire’s otherwise classy design.

    Adjustable airflow contributes to the better flavor and more intense experience of the new coil build, potentially producing more vapor than you have ever experienced.

    Cleito Cuffs: Accessorize for the Day

    Aspire offers 4 colors for Cleito cuffs like selections of shoes and handbags. This is their heat dissipation accessory carried in black, blue, yellow, and red. You add one of these to the top cap as an optional extra in order to get rid of excess heat but not flavor.

    It’s also possible to vape without this rubbery-looking item. Cuffs give your tank childish vibrancy, but they detract somewhat from the classy profile of an Aspire Cleito sans-cuff. They’re visually unique, that’s for sure, but don’t seem to fit with Aspire’s image in the high-class tank market.

    Specifications: The Numbers

    All of this information boils down to a series of dimensions and measurements. The tank measures 2 ¼ inches long wit the tip. It is 22 mm wide: compact and suitable for most box mods, even the truly slender ones like an iStick 40W, not to mention all small (18650) mechanical and regulated tube mods. The tank is mid-sized at 3.5 ml. When you buy a kit, it comes with two Cleito Clapton coil heads and a set of colored cuffs (all four). The insulated drip tip is also included. You should be able to buy one for around $20.

    Buy Online: